ThermaData TDC data logger with internal sensor

- NTC thermistor sensors. - -30 to 85°C (internal) / -40 to 125°C (external). - Ø3.3 x 100 mm probe and 1 m PVC / PFA cable. - Getting started guide - Certificate of conformity Note: When ordering loggers, it is necessary to order at least one ThermaData® logger holder. The ThermaData® TD1C data logger includes an external NTC thermistor sensor with a one meter PUR/PVC cable and connector that measures over the range of -40 to 125°C, and an internal sensor that measures over the range from -30 to 85°C. The TD1C can store up to 2 x 2000 readings. The ThermaData® logger TD1C data logger is housed in a waterproof and ergonomic case designed to meet IP66 / 67 protection. meets EN 12830: 1999, S & T, C & D, 1, 0.5 Each logger includes an LCD display and red and green LEDs, flashing green LED indicates the logger is active / recording and flashing red LED indicates your custom preset alarms have been exceeded. Communications are via a USB docking station supplied with ThermaData® Studio software. The ThermaData Mk2 series of loggers consist of a full range of portable data loggers using the latest electronic technology. ThermaData loggers are housed in waterproof and ergonomic enclosures designed to meet IP66/67 protection. The ThermaData Mk2 range of loggers offer the choice of blind data loggers or data loggers with LCD display. Other options include internal and external temperature sensors/probes. External probes can be fixed or detachable via a three-pin waterproof connector. Remote temperature probes are supplied with one, two or three meter PVC/PFA (fixed) or PUR/PVC (detachable) cable (where applicable). Each logger includes a red and green LED, flashing green LED indicates the logger is active / recording and flashing red LED indicates your custom preset alarms have been exceeded. Communications are via a USB docking station supplied with ThermaData software. Please note: when ordering loggers, it is necessary to order at least one ThermaData® recording cradle. ThermaData® Studio PC software The ThermaData logger is connected to a PC via a USB docking station. By selecting the corresponding icon, the data can be downloaded and displayed as a graph, table or summary. The information can be analyzed by zooming in, saving it as a Studio file, or exporting it as a text (.txt) or Excel (.xls) file to other software. ThermaData Studio software incorporates several useful features, including the ability to display two traces on one graph, trace colors are user selectable. All files can be viewed as thumbnail icons for easy identification. ThermaData Studio software will work the same way with all ThermaData loggers. The software is both powerful and sophisticated, yet user-friendly, helping to organize and analyze temperature data to provide management information. The software allows the user to program the sample rate / logging interval (0.1 to 255 minutes), real time clock, °C or °F, delayed start (maximum 23 hours, 59 minutes and 59 seconds) or select a magnetic start option. It is also possible to include a 32 character user ID for each recorder. By selecting continuous logging in the software options, it is possible to start ThermaData logger once and never have to reset its settings again, even if it is downloaded regularly. Unlike most low cost loggers, ThermaData logger will continue to record during and after data download. ThermaData Studio software is included with each USB cradle. Note: When ordering loggers initially, it is necessary to order at least one ThermaData recording medium.